CATEGORIES
- DU Bushing
- FB090 bronze bearing
- FB092 bronze bearing
- DX Bushings
- Bimetal Bearing
- Bronze Bushing
- Flange Bearing
- Spherical Bearing
- Bearing Retainer
- Sintered Bushing
- Self Lubricanting Bearing
- Sliding Pads
- Washer
- Ball Roller Bearing Wheel
- COM Cloth-reinforced Phenolic Re
- Filled and Modified Fluoroplasti
- Hydraulic Seal Series
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- Which one is wear-resistant, steel sle
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
- Red color ptfe bushing
- Pipe-Mounted Ball Transfer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan.
- TEL: +86 731 84770165
- FAX: +86 731 84770163
- E-mail: sales1@slide-bearing.com
> Flange Bearing
WF-WB700 Flanged Bushing
- Hardness :HB90-HB125
- Yield point: 250 N/mm2
- Tensile strength:450 N/mm2
- Maximum Dynamic Load:40 N/mm2
- Product description: WF-WB700 Flanged Bushing is a kind of slide bearing in split wrapped bushing. It is made of CuSn6.5 or CuSm.The bronze is made as the particular formulation with high specific and gravity.
PRODUCT INTRODUCTION
►Possible Applications:
Industrial: Widely used in construction machinery, agricultural machinery and so on.
►Advantages:
1. Lead-free and fully recyclable. Less expensive than machined bushing.
2. Minimal space required.
3. Lighter in weight than machined bushing or roller bearing.
4. High stability under load, therefore particularly suitable for oscillating bearing.
5. Lubrication grooves are coined into the metal, and any shape desired is possible.
6. Grease depots for long-term lubrication.
►Flanged bushing offer the following additional advantages:
1. A single bushing and take both radial and axial forces.
2. A single bearing element is needed to replace both thrust washer and cylindrical bushing.
3. High stability.
4. No fixing of thrust washers.
1. Material
Chemical Composition (%)
Type
CuSn8P
Cu = 91.3% Sn = 8.5% P =0.2%
Lead Free
CuPb10Sn10
Cu = Balance. Sn = 9~11%, Pb=9~11%
With Lead
2. With diamond oil pocket
3. Lead-free & Low-maintenance
4. Hardness HB90-HB125
►Physical and Mechanical Properties:
Maximum Operating Temperature Tmax
200
°C
Minimum Operating Temperature Tmin
-80
°C
Maximum Static Load Psta,max
120
N/mm2
Maximum Dynamic Load Pdyn,max
40
N/mm2
Maximum Sliding Speed V
2.5
m/s
RELATED PRODUCTS
-
WF-WB702 Flanged Bushing
WF-WB702 Flanged Bushing is made from CuSn6.5 bronze with oil ...
-
WF-WB800 Harden Flanged
WF-WB800 Harden Flanged Bushing is made from CuSn6.5 or CuSn8,...
-
WF-WB802 Harden Flanged
WF-WB802 Harden Flanged Bushing is made of CuSn8 in hardness o...