|
|
|
Series
Description: metal plastic composite self-lubricating material to
high-quality carbon steel as the substrate, the middle sintered copper
powder layer, the surface rolling to PTFE or thermoplastic polymer-based
low friction material as the bearing working layer. This
material structure has excellent mechanical carrying capacity, the
middle copper powder layer can not only timely delivery of the bearing
running the total heat generated, but also improve the plastic layer and
the bonding strength between the substrate. PTFE
design for fully dry friction state, and POM and other thermoplastic
design for boundary lubrication conditions of low-speed high load
conditions. More >>
|
|
|
|
|
 |
|
Series
Description: With high quality low carbon steel as the matrix, the
surface sintering with low friction coefficient, good wear resistance
steel alloy powder as the bearing working layer, the surface of these
copper alloy materials can be used according to the use of processing
all kinds of oil holes, Oil
holes to improve the PV value under lubrication conditions; Jintai has
developed various materials containing lead, lead-free and better
frictional properties based on lead-free to meet the use of various
types of conditions. More >>
|
|
|
|
|
 |
|
Series
Description: CuSn8 bronze as a substrate rolled from a bearing with
high load, good wear resistance of the economy of thin-walled
copper-based rolling bearings. According
to different lubrication conditions designed to diamond-shaped hole and
hole through the hole to ensure that the early operation of the bearing
can quickly establish a lubricating oil film, thereby reducing the
initial friction coefficient. Products for agricultural machinery, construction machinery, truck chassis parts and other occasions. More >>
|
|
|
|
|
 |
|
Series
Description: Wear-resistant metal material as the base, by adding a
variety of lubricating materials to reduce the friction factor, and to
achieve self-lubrication. This
material structure combines the high load of metal, good impact
resistance and non-metallic low friction coefficient, can be satisfied
with the use of a variety of different conditions. According
to the distribution of solid lubricants, divided into a certain
proportion of regular arrangement of the mosaic type and evenly
distributed in the working layer of the dispersion of solid lubricating
bearings two categories, mosaic solid lubricating bearings suitable for
low-speed high load, and dispersion-type solid Lubricated bearings even in the micro, high-speed conditions can maintain a very low coefficient of friction. More >>
|
|
|
|
|
 |
|
Series
Description: non-metallic self-lubricating bearings, including EPB
engineering plastics and CR winding type, suitable for dry friction
self-lubricating conditions. EPB
series of bearings to high-performance engineering plastics to the
matrix by injection molding processing, the internal filling of the
reinforced fiber to improve the bearing bearing and impact resistance,
and solid special grease is reduced friction coefficient; CR series of
bearings Reinforced
resin as the bearing matrix, covered with PTFE-based low friction
material for the bearing working layer, this material structure with
non-metallic properties, but also has a high load capacity of metal
materials. More >>
|
