|
|
|
Product
Overview: Can be used in dry friction and lubrication conditions for
long-term use without further maintenance; steam locomotives: tractors,
combine harvesters, crop sprays, bulldozers, graders and other
construction machinery; in the automotive industry for power steering Pumps, steering gear thrust pads, disc brakes, shock absorbers,
door hinges, wipers, chair angle, air valves and solenoid valves, etc .;
office business machinery: copiers, fax machines, printers, mail
processors,.etc.
|
|
|
|
|
 |
|
Product
Overview: Compared to the traditional three-layer composite material,
the added high-performance resin provides better resistance to magic,
the thickness of the resin layer according to the actual use of the
conditions to determine, including the need to meet the re-processing
after assembly to get better tolerances ,
In a particular situation need to better resistance to magic
performance, balance the friction coefficient, longer service life and
other requirements. Typical applications include: engine tension wheel, idler, solenoid valve, cylinder guide sleeve, brake system.
|
|
|
|
|
 |
|
Product
Summary: The material is developed in order to meet the high load,
fluid lubrication of the use of hydraulic neighborhood, due to the PTFE
wear-resistant materials added a special lipophilic fiber, making this
material in the cavitation corrosion and resistance to fluid corrosion
than the average PTFE bearings are more excellent; at the same time under the
conditions of fluid lubrication, this material is very low friction
coefficient and better wear resistance, in the design can achieve a
higher PV value.
|
|
|
|
|
 |
|
Product
Description: Copper-based plastic composite self-lubricating bearings
and steel-based plastic composite self-lubricating bearing series has a
similar composition of the material structure, the difference is the use
of bronze substrate, can not be used for refueling or difficult to
refuel the work site, wear resistance , Low friction coefficient, long service life, good performance, low noise, no pollution, good corrosion resistance. The transfer film formed during the operation plays a role in protecting the grinding shaft, without bite axis. As the substrate is bronze, compared to steel-based plastic
composite self-lubricating bearings have better corrosion resistance.
|
|
|
|
|
 |
|
Product
Description: With aluminum substrate as the base through the adhesive
surface covered with a side of the PTFE-based wear-resistant materials,
PTFE layer thickness of 0.20mm or more, so the bearing can be pressed
after the PTFE layer to re-extrusion Get better with the gap, while thick-walled wear-resistant layer can reduce the bearing running noise. Products are widely used in office machinery, lightweight sports car shock absorbers, and so on.
|
|
|
|
|
 |
|
Copper and steel plate composite boundary lubrication bearings
Product
Overview: Suitable for long-term use under boundary lubrication without
maintenance; it is recommended that the initial grease lubrication, the
bearing surface of the reservoir can ensure the best oil distribution,
and the process of fuel can greatly improve the service life; Rotary
motion and rocking motion; excellent load carrying capacity, low
coefficient of friction and very low wear resistance; no water
absorption and oil absorption, dimensional stability; bearings can be
reworked after press fitting to get better tolerances ; Can be suitable for -150 ℃ ~ +250 ℃ temperature range. |
|
|
|
|
 |
|
Copper mesh + PTFE / solid lubricant |
|
|
|
|
 |
|
Thermoplastic boundary lubricated bearings Product Overview: thermoplastic polymer boundary lubricating bearings to high-quality metal materials as the matrix, the middle sintered porous spherical bronze powder, the surface covered with POM-based thermoplastic wear-resistant materials as the bearing face; metal matrix provides the most basic bearing machinery Performance, the middle copper powder layer is to improve the bonding strength between the wear-resistant material and the steel plate. |
