How to install the composite bearing, the composite bearing should pay attention to:
1. When installing the composite bearing produced by Dongsheng Bearing, should the dimensions of the countershaft and bearing body of the composite bearing be processed according to the drawings before installation? Are the corners and right angles of the shaft and bearing body protruding? Can the composite bearing make full contact with the end face of the bearing? All must be fully checked. To avoid problems after installation.
2. The composite bearing has strict quality inspection when it leaves the factory, but in general, it is still necessary to determine whether the mating surface of the shaft and bearing body is damaged or bumped when the composite bearing is installed. Whether there is dust or mold sand on the surface of the bearing shell. If necessary, remove it with oil grindstone, fine sandpaper or clean cloth before installation.
3. Before installing the composite bearing, in order to avoid collision during installation, the working surface of the shaft and bearing body should be wiped with a small amount of lubricant. The composite bearing produced byJintai Bearing has its own lubricant.
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- Which one is wear-resistant, steel sle
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
- Red color ptfe bushing
- Pipe-Mounted Ball Transfer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan.
- TEL: +86 731 84770165
- FAX: +86 731 84770163
- E-mail: sales1@slide-bearing.com
> Industry news