It has the characteristics of high load carrying capacity, impact resistance, high temperature resistance, and strong self-lubricating ability. It is especially suitable for heavy load and low speed.
Reciprocating or swinging and other occasions that are difficult to lubricate and form an oil film, it is not afraid of water wash and other acid erosion and erosion.
The majority of users generally report that inlaid bearings not only save oil and energy, but also have a longer working life than ordinary sliding bearings.
The current products have been widely used in metallurgical continuous casting machines, rolling equipment, mining machinery, ships, steam turbines, water turbines, injection molding machines and equipment production lines.
The production process of oil-free bearings
Due to the requirements of the production process, some key equipment of industrial and mining enterprises is operating under extremely harsh working conditions.
Due to the heavy equipment, high ambient temperature, large dust or acidic corrosive gases CO, SO2 in the air, etc., it has brought many problems to the lubrication of the equipment, and the friction and wear are serious, so far.
Most of the above-mentioned domestic enterprises still use traditional oil and grease lubrication. In fact, these industrial and mining conditions have exceeded the scope of oil and grease lubrication. Bearings and other friction pairs are prone to bite or seizure, causing serious parts wear And damage, often causing equipment outages. In order to produce continuous operation, in addition to the installation of multiple equipment for wheel repair in the original design, a large number of maintenance personnel must be invested.
severely restricts the increase in productivity. Spare parts and energy consumption are extremely high, which has become an important obstacle to the development of production. Automobile manufacturing, cement production, petrochemical and other companies have all put forward requirements for providing special lubricating materials under complex working conditions.
For this reason, the research on inlaid self-lubricating composite materials has highlighted its own characteristics in the material formulation and preparation process, and the material performance has reached the international advanced level. It has solved the lubrication problem under special working conditions for the enterprise and brought obvious Economic and social benefits.