The bearing shell is equivalent to the outer ring of the sliding
bearing, the sleeve is integral, and the self-lubricating compound
sleeve is movable relative to the shaft, while the bearing shell is
partially sliced and the opposite shaft is rotated.
Spigot: The part that makes up the shaft supported by the bearing;
Bearing bush: matching journal parts;
Bushing: made of a full cylindrical sleeve.
In the LEGO Mindstorms series and the BioTrans RoSys copper-based
self-lubricating column robotic assembly, the bushing specifically
refers to the silver-gray LEGO standard shaft retainer, split sleeve and
½ sleeve.
Bushing material
Specifications
of plastic bushings: POM POM plastic bushings, PA nylon plastic
bushings, PTFE poly flange bushings PTFE plastic bushings, Teflon
plastic bushings, Teflon plastic bushings. Plastic
sleeve features: acid, alkali, corrosion, mechanical strength, has good
wear resistance, heat resistance, oil resistance and chemical
resistance. Plastic sleeve material PTFE / Teflon / Teflon / PTFE, POM POM, nylon PA, polypropylene PP. Products for aerospace, automotive, sensors, medical, pharmaceutical,
satellite, valves, pumps, sanitary ware, electronics, bearings,
electrical appliances and other industries.
Bimetal bushings parts material, is a patented product, is a profiled, standardized shaft sleeve products of new materials. Mainly
for a variety of bushings processing enterprises and general machinery
factory and machinery repair and other enterprises, to provide bimetal
bushings Near Net Shape Material (Near Net Shape Material). With this bimetal sleeve part-shaped material, a very small amount of
machining, such as chamfering, drilling, carts or pressure vessels, can
be used as a sleeve for direct mounting.
Copper sleeve in the role of machinery?
Fixed
In
the gear shaft movement as far as possible not to let it because of the
vibration and the direction of the phenomenon of offset, this time you
need to use copper sleeve to help fixed. The most important role of the copper sleeve in the machine is the
fixed position, which is all the performance of the copper sleeve.
2 sliding bearings
This is another role that copper bushings play in the machine. In order to reduce costs, cost savings, this time you need to use plain bearings, and copper sleeve just have this function. It
is mainly based on the axial bearing to the thickness of the sleeve
bearing design, and in fact copper sleeve is a sliding bearing, when the
mechanical rotation is relatively low, the clearance requirements are
relatively high environment can be used Copper sleeve to replace the rolling bearing to operate. Copper sleeve wear resistance, can be used for a long time, so to a large extent, it can help them save costs.
Copper sleeve is mainly used in what areas?
The
copper sleeve on the shaft plays the role of a bearing and belongs to
the category of sliding bearings. It is a bearing that works under
sliding friction. The relative axis is rotated. Generally, it is
necessary to assist with the lubrication system. Plain bearings work smoothly, reliably and without noise. In liquid lubrication conditions, the sliding surface is separated by
the lubricant without direct contact, but also can greatly reduce the
friction loss and surface wear, oil film also has some vibration
absorption capacity
Role is to lubricate, heat, friction, prolong life and so on.
Copper
sleeve is mainly used in machinery, printing and dyeing, paper making,
chemical, aerospace, coal, petroleum, automotive, construction
machinery, metallurgy and other industries.
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- Which one is wear-resistant, steel sle
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
- Red color ptfe bushing
- Pipe-Mounted Ball Transfer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan.
- TEL: +86 731 84770165
- FAX: +86 731 84770163
- E-mail: sales1@slide-bearing.com
> Company news