Fluid erosion Bearing fluid violent impact refers to the solid surface
can cause body fluid corrosion, solid surface of the scar, the damage
of the surface is smooth.
The normal operation of rolling bearings, except in the case of rolling conflicts, is accompanied by sliding conflicts. The primary wear-resistant bearing components are the sliding contact
surfaces, the rolling contact surfaces between the rolling elements and
the holding frame pockets, the contact surfaces between the ring guide
plates between the support frame and the guide rib ends and the guide
rollers.
The presence of sliding interference in the rolling bearing can not avoid the wear of bearing components. If
the wear resistance of bearing steel, rolling bearings because of
premature wear and loss of precision or due to the accuracy of rotation
bearing vibration added to reduce the number of life. Therefore, with high wear-resistant bearing steel requirements.
The
data indicate that due to the primary cause of mechanical failure or
pre-wear, half is handled with smooth handling of smooth bearings on
highly loaded bearings, avoiding wear or sintering of bearings, gears,
moving parts, avoiding and reducing wear and tear, and reducing
conflicts ,
To avoid equipment problems, improve the power of production equipment;
save energy, improve the utilization of energy efficiency, add economic
efficiency, smooth handling of the primary task. Car bearing model query
Retaining ring fixed structure is simple, easy disassembly, small axial dimensions. And
conditioning ring IKO bearing surface and the ring, but also adjust the
bearing axial position, machining, installation error compensation. Suitable for low speed, axial load is not large place.
Suspension can be used in this way ring fixed bearing outer ring with stop groove. Simple structure, small axial dimension. Can not withstand large axial loads.
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- Which one is wear-resistant, steel sle
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
- Red color ptfe bushing
- Pipe-Mounted Ball Transfer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan.
- TEL: +86 731 84770165
- FAX: +86 731 84770163
- E-mail: sales1@slide-bearing.com
> Industry news