product structure
Jintai Steel plugged solid lubricants bearing is alloy tool steel as substrate, the surface at a certain angle and density mosaic made of specially formulated solid lubricants, this product combines the wear resistance and self-lubricating properties of the steel of the solid lubricant, so that in the course without refueling maintenance less. The product has a high load carrying capacity, impact resistance, self-lubricating ability and other characteristics, especially suitable for heavy, low-speed, swinging back and forth, or the like is difficult to form a film of lubrication and occasion. And its working life longer than ordinary plain bearings.
Products are widely used in high load, intermittent or swing movement and other occasions. This product can be used as a reciprocating motion bushings frequent automobile molds, and other work. Particularly adapted in lifting machinery support site. Example: Excavators support, crane support and so on. However, due to the matrix of the steel, it should not be used in water or acid applications.
Application Select
In mechanical design, such as the difficulties encountered in the following may be considered optional
1, the next low-speed heavy state, oily synovial unable to maintain;
2, high or low temperatures, or large changes in ambient temperature;
3, the working prone shock loads;
4, the need for frequent starting and under high load start;
5, long maintenance cycle or high maintenance costs, require long working life bearing;
6, the working environment or mechanical structural constraints, it is difficult for lubricants.
The product provides standard straight sets, flanged bushings, bearings, thrust washers washer. It can also be customized according to customer requirements.