1, sliding bearings can also be used to lubricate grease, grease in the choice of the following points should be considered:
(1)
bearing load, low speed, you should choose a small penetration of the
grease, and vice versa to choose the cone into the degree of large. High-speed bearings used to tap the degree of small, good mechanical stability of the grease. It is important to note that the viscosity of the base oil of the grease is lower.
(2)
the choice of grease drops generally higher than the operating
temperature of 20-30 ℃, continuous operation in the case of high
temperature, pay attention not to exceed the allowable use of grease
temperature range.
(3) sliding bearings in the
water or wet environment work, should choose a good water resistance of
calcium, aluminum or lithium grease.
(4) use a good adhesion of the grease.
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- Which one is wear-resistant, steel sle
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
- Red color ptfe bushing
- Pipe-Mounted Ball Transfer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan.
- TEL: +86 731 84770165
- FAX: +86 731 84770163
- E-mail: sales1@slide-bearing.com
> Company news