Hunan
Jintai Hardware and Machinery Co., Ltd. introduces a large class of
solid-inlaid self-smoothing bearings (JDB for short), a novel smooth
bearing featuring both metal bearing features and oil-free sleek bearing
characteristics. It is supported by a metal substrate and specially
formulated. Solid smooth material plays a smooth effect. The inlaid self-smooth composite material is a new type of
extreme pressure resistant solid smooth material consisting of a
metallic substrate and a solid smoother paste embedded in the pores or
grooves of the substrate.
The metal substrate took most of the load during the conflict. Through
the collision, the solid smoothing agent in the hole or trough is
transported or reversed to the conflict surface, and a smooth,
outstanding, solidly attached and uniformly covered solid transport film
is formed on the conflict surface, which greatly reduces the conflict
wear. As
the conflict progresses, the embedded solid smoothing agent is
continuously provided on the conflict surface, ensuring excellent
smoothness in long-term operation. It
has the characteristics of high bearing capacity, impact resistance,
high temperature resistance, and strong self-smoothness. It is
especially suitable for occasions where it is difficult to smooth and
constitute oil film, such as heavy load, low speed, reciprocating or
rocking, and is not afraid of erosion of water and other acids. And scouring.
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- Which one is wear-resistant, steel sle
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
- Red color ptfe bushing
- Pipe-Mounted Ball Transfer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan.
- TEL: +86 731 84770165
- FAX: +86 731 84770163
- E-mail: sales1@slide-bearing.com
> Company news