Industrial Bearing Maintenance smooth means

In order to adhere to long for the excellent condition of the original features as possible bearing shall be maintenance, repair, in order to prevent accidents in the first place, to ensure the reliability of the work, increase productivity, economy. Best Conservation corresponding mechanical working conditions job specification, timing. Content includes a sliding bearing monitoring working conditions, compensate or replace smoothing agent, the timing open to view. As a matter of maintenance work, bearing rotating sound, vibration, temperature, status, and so the smoothing agents.

Bearing cleaning: When you unpack the lower bearing maintenance, bearing the appearance of the first record, to confirm the remaining amount of the composite bearing smooth agent, agent sampling or view it with a smooth after washing bearings. As a cleaning agent, generally use gasoline, kerosene.

Removed to clean the bearing, sub-rough cleaning and fine cleaning, respectively, placed in the container, put the first metal net bottom, bearing no direct touch touch dirt container. Coarse cleaning, if the bearing with dirt rotation will damage the bearing rolling surfaces, should be attention. In the crude oil cleaning, use smooth brush to remove grease, adhesive material, generally clean, into sperm washing.

Sperm washing is bearing while rotating in clean oil, while carefully clean. In addition, clean oil must often adhere to clean. {TodayHot}

Bearing repair and judgment: In order to determine open bearing down is not able to use to view the rear bearing wash clean. See raceway, rolling surface, the surface condition of cooperation, adhere to wear condition frame, bearing clearance has nothing to add and drop precision scale damage, abnormal. Non-leave type of small ball bearings, the inner ring with one hand support level, rotating outer ring to confirm is not smooth.

Tapered roller bearings and other bearings parting shape, capable of rolling body raceway outer parting view.

Large bearings because they can not rotate by hand, pay attention to view the rolling body raceway, adhere to frame, and other exterior wall surface, the importance of bearing the higher the greater the need steady viewing.

Smooth bearing intent:

Smooth rolling bearing intent is to reduce internal conflicts and bearing wear, to avoid burning stick, its usefulness as smooth. {HotTag}

(1), reduce conflict and wear.

In constituting the bearing rings, rolling bodies and adhere to each other's touch some, avoid touching metal, reducing conflict and wear.

(2), extends fatigue life expectancy.

Number of rolling bearing fatigue life, in rotation, rolling smooth touch surface outstanding, then extend. Conversely, low oil viscosity, smooth film thickness is not good, is shortened.

(3), exhaust heat of conflict, cooling.

Circulating oil to the oil discharge method or the like can be generated by the heat of conflict, or heat coming from the external cooling. Avoid bearing overheating, avoid lubricating oil itself aging.

(4), the other

Also avoid dust and debris inside the bearing, or to avoid rust, corrosion effect. Smooth approach:
Smooth way bearings, divided into grease and oil smooth smooth. In order to make an excellent bearing performance functions, the first to use the selection of appropriate conditions of use smooth way intentions. If there is only smooth, oil slick smoothness dominant. However, the grease around the bearing can be simplified smooth construction expertise, will be smooth and grease oil slick interest comparison.

Bearing means for:

Bearing means is not accurate, affecting accuracy, life expectancy, functional. Thus, part of the design and assembly of the device on the bearing to be plenty of discussion. To work in accordance with the desired specification means. Job specifications of the project generally as follows:

(1) cleaning bearings and bearing components stakeholders;
(2) to view the status of dry scales and finishing system components;
(3), means;
(4) to view the device after a good bearing;
(5), smoothing agent supply.

Before the device is about hope, just open the package bearing. Usually smooth smooth fat, dirty, filled directly smooth fat. Lubricating oil is smooth, generally you do not have to clean, but, with the instrument or high-speed bearings, etc., use clean oil wash clean, remove rust coating on the bearing agent. Remove the bearing rust inhibitor, rust, so you can not place no matter what. Furthermore, the grease has a smooth sealed bearings, dirty direct use.

Way bearing means, because bearing structure, cooperation, conditions vary, usually because more axis of rotation, the inner ring needs interference cooperation. Cylindrical bore bearings, the use of the press pushed, or fitted with a hot way. Cone occasions, direct means taper shaft, or sleeve device.

When the device to the housing clearance cooperation more generally, the outer ring interference, usually pressed into the press, but also shrink or cooperative approach after the cooling apparatus. With dry ice as the coolant, occasions shrink cooperation means, moisture in the air will condense on the surface of the bearing. Therefore, the demand for proper corrosion protection.