Composite
crusher in the process of running, from the appearance it is composed
of the host motor and the rack, and from the internal structure, it is
composed of the rotor hammer, and the rotor plate, bearing, bearing on
the rotation of the equipment operation is critical Equipment, bearing the good or bad and the use of equipment on the bearing life of the bearing are influential. Composite
crusher in the operation is mainly crusher to bear the radial cycle of
alternating impact load is too large to form a simple bearing fatigue
failure, rolling the simple appearance of the surface erosion, easy to
damage. We in the procurement of composite crusher see composite crusher
offer, but also take into account the quality of the bearing, then how
can the composite bearings can be purchased when the quality of
composite crusher bearings?
In the procurement of composite crusher selection of bearings, as long
as we choose in accordance with the following three ways to ensure that
you can purchase to the good equipment.
1, in the selection of bearing models to be accurately selected. Double row radial spherical roller bearings with a strong carrying
capacity, good self-aligning performance advantages, so the selection of
more choice when the bearings as a rotor bearings.
2, crusher bearing conditioning process needs to improve the situation. The impact load acting on the bearing depends on the impulse acting on the rotor and the support compliance of the bearing. Increasing the support of the bearing seat will reduce the impact load acting on the bearing. To
this end, we can between the bearing and the support frame to add the
appropriate thickness of the rubber plate to improve the bearing support
flexibility. As a result of the rubber plate, increased support flexibility, and
then absorb a part of the vibration energy, improve the bearing force,
to extend the use of longevity intent.
3,
on the crusher bearing cleaning operations, mining crusher is usually
clean with gasoline or kerosene to clean, jaw crusher has always been so
clean. If
you do not pay attention to cleaning, bearing the conflict will
increase, the process will occur too much heat and equipment unlucky.
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- Which one is wear-resistant, steel sle
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
- Red color ptfe bushing
- Pipe-Mounted Ball Transfer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan.
- TEL: +86 731 84770165
- FAX: +86 731 84770163
- E-mail: sales1@slide-bearing.com
> Industry news